Product description

MZ 2D NT

Diaphragm pump

Diaphragm pumps are an excellent solution for continuous, oil-free evacuation and pumping of gases. All parts in these MZ 2 series pumps that are in contact with pumped media are made of aluminum, stainless steel and selected plastics, allowing a wide range of applications for non-corrosive gases. The two-stage construction provides the advantageous combination of high pumping speed and an ultimate vacuum down to 4 mbar. The highly flexible fabric-reinforced double diaphragms made of FKM provide high reliability and extended operating life. The NT-series features further improved performance data and compact design.

Information on the disposal of old devices »

Technical Data

Technical data and graphs

Item number 20732202
Max. pumping speed 50 Hz 2.3 m³/h
Max. pumping speed 60 Hz 1.5 cfm
Ultimate vacuum 4 mbar
Ultimate vacuum in torr 3 torr
Number of heads 2
Number of stages 3
Lower ambient temperature (operation) 10 °C
Upper ambient temperature (operation) 40 °C
Lower ambient temperature (storage) -10 °C
Upper ambient temperature (storage) 60 °C
Max. outlet pressure (abs.) 1.1 bar
Inlet connection Small flange KF DN 16
Outlet connection Silencer / G1/4"
Rated motor power 0.18 kW
Rated motor speed at 50/60 Hz 1500/1800 min⁻¹
Protection class IEC 60529 IP 40
Dimension L in mm 246 mm
Dimension W in mm 242 mm
Dimension H in mm 198 mm
Weight 11.4 kg
Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) 47 dBA
ATEX conformity II 3/- G Ex h IIC T3 Gc X Internal Atm. only
NRTL certification Yes
Items supplied Pump completely mounted, ready for use, with manual.
Rated mains voltage range 1 230 V
Mains frequency 1 50-60 Hz
Items supplied
Pump completely mounted, ready for use, with manual.
Applications

Application examples

Vacuum drying oven
Vacuum drying oven
Fore vacuum for turbomolecular pumps
Fore vacuum for turbomolecular pumps

Vacuum drying oven

For vacuum drying ovens, chemical-resistant, condensate-compatible pumps with high flow rates are essential for handling large volumes of vapor and gently drying samples. For primary drying under rough vacuum, choose oil-free chemical diaphragm pumps with a final vacuum of approximately 1–10 mbar. With VARIO control, the vacuum is adjusted via motor speed: optimized evaporation rates, reduced process times, quiet operation, and lower energy consumption. If residual drying under high vacuum is required, the VACUU·PURE 10C screw pump is ideal: oil-free, chemically resistant, with no wear parts, and featuring a regeneration mode for increased sample throughput. Recommended: AK separator (inlet) and EK exhaust condenser (outlet) for protection and near-total solvent recovery.

Vacuum drying oven

Fore vacuum for turbomolecular pumps

The fore-vacuum plays a decisive role in determining the ultimate vacuum (the maximum achievable vacuum) and purity in HV/UHV systems. Several factors are critical here: The fore-vacuum pump must be compatible with the maximum permissible fore-vacuum of the turbomolecular pump; its pumping speed determines both the pumping time and the maximum gas flow rate that can be handled during continuous operation. Crucial for a clean and hydrocarbon-free vacuum, especially in physics applications: Our oil-free diaphragm pumps are suitable down to approx. 1 mbar, and the oil-free screw pump VACUU·PURE down to 10⁻³ mbar. They prevent contamination and wear and tear and ensure a constant pumping speed for uninterrupted operation.

Fore vacuum for turbomolecular pumps
Downloads

Overview Downloads

image
Technical Data Sheet | PDF | 4.1 MB 4.1 MB 4.1 MB 4.1 MB 4.2 MB
image
Safety information
Multilingual Download download
Safety information | PDF | 2.7 MB

Related Products

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
  • check-circle Ultimate vacuum 7 mbar
  • check-circle Pumping speed 2.2 m³/h
  • check-circle Oilfree
  • check-circle Ultimate vacuum 100 mbar
  • check-circle Pumping speed 0.7 m³/h
  • check-circle Oilfree