Product description

MD 12C NT +AK+EK

Chemistry vacuum system

These chemistry vacuum systems have a wide range of applications like evacuation, evaporation and pumping of gases and vapors. They provide particularly high pumping speed and are ideal for higher vacuum requirements, e.g., with high boiling solvents. The base MD 12C NT pump obtains a very good ultimate vacuum even with open gas ballast valve for condensate purge and delivers high pumping speed in a compact design. The pump design offers exceptionally high chemical resistance supporting almost universal usage in chemistry and pharmaceutics. The inlet separator (AK) retains particles and liquid droplets, the waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling, and active protection of the environment.

Information on the disposal of old devices »

Accessories and spare parts
Technical Data

Technical data and graphs

Please select a product to view technical data.

Items supplied
Pumping unit completely mounted, ready for use, with manual.
Applications

Application examples

Reactors and synthesis
Reactors and synthesis
Vacuum drying oven
Vacuum drying oven

Reactors and synthesis

In reactors and synthesis processes, vacuum serves various purposes: oxygen exclusion, solvent extraction, gas transfer, or pressure reduction as a reaction condition. The requirements for the ultimate pressure (maximum achievable vacuum) vary depending on the process. Oil-free chemical diaphragm pumps are suitable for the pressure range up to 1 mbar. Our VARIO technology optimizes process times through precise, demand-based vacuum control via speed adjustment. The oil- and wear-free VACUU·PURE 10C chemical screw pump is suitable for pressures up to 10⁻³ mbar. The modular VAC 24seven process system is available for larger volumes.

Reactors and synthesis

Vacuum drying oven

For vacuum drying ovens, chemical-resistant, condensate-compatible pumps with high flow rates are essential for handling large volumes of vapor and gently drying samples. For primary drying under rough vacuum, choose oil-free chemical diaphragm pumps with a final vacuum of approximately 1–10 mbar. With VARIO control, the vacuum is adjusted via motor speed: optimized evaporation rates, reduced process times, quiet operation, and lower energy consumption. If residual drying under high vacuum is required, the VACUU·PURE 10C screw pump is ideal: oil-free, chemically resistant, with no wear parts, and featuring a regeneration mode for increased sample throughput. Recommended: AK separator (inlet) and EK exhaust condenser (outlet) for protection and near-total solvent recovery.

Vacuum drying oven
Downloads

Overview Downloads

image
Brochure | PDF | 2 MB 2 MB
image
Technical Data Sheet | PDF | 4.1 MB 4.1 MB 4.1 MB 4.1 MB 4.1 MB
image
Manual vacuum pump | PDF | 19.6 MB 21.6 MB 19.5 MB 19.7 MB 19.6 MB
image
Safety information
Multilingual Download download
Safety information | PDF | 2.7 MB

Related Products

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
  • check-circle Ultimate vacuum 2 mbar
  • check-circle Pumping speed 1.3 m³/h
  • check-circle Oilfree & chemically resistant
  • check-circle Ultimate vacuum 1.5 mbar
  • check-circle Pumping speed 3.4 m³/h
  • check-circle Oilfree & chemically resistant
  • check-circle Ultimate vacuum 1.5 mbar
  • check-circle Pumping speed 3.4 m³/h
  • check-circle Oilfree & chemically resistant